Filter heating

The micfil filter heating is used to preheat diesel or biofuels (biodiesel, vegetable oil SVO/WVO) and prevents freezing problems through gelled or clogged fuel filters.

In extreme cases, this will cause blockages of the entire fuel system and engine breakdown.

Features

• Electric flow heater (12 V DC, max. 200 W; 24 V DC, max. 300 W)
• Thermo switch (Temperature control)
• Rotary switch with control light
• Relay
• Cable set with plug
• Fuse and nozzle
• Div. incidentals
• Detailed installation guide
• General operating license

The following models are currently on the market:

DH screw/filter version

Installation instead of the existing banjo screw at the filter‘s entrance
(thread: M14x1.5 or M16x1.5)

DHS universal version

Installation at the filter‘s entrance in the fuel line
(flexible rubber hose with inner diameter. 08/10/13 mm)

DHSE universal version Ermeto

Installation at the filter‘s entrance in the fuel line
(polyamide/steel pipe with outer diameter. 08/10/12mm)